NANALOGDocs Open the studio

Soft Slide 100

Film · soft reversal, calm skin

Soft Slide 100 is the gentle slide film, a reversal stock made for skin. It gives your picture slide film's clean color and deep shadows, with calmer contrast and saturation than the other slides.

Before · AfterThe sample picture with no effectSoft Slide 100 at its default settings

The sample with the Flatbed Scan preset. Drag to compare, or press Play with it to tune it live. Open as a shared look

What it's like

Hold a slide up to a light box. The colors glow because there's no print in the way, the blacks are real black and the picture is fine and clean. This roll keeps that clarity but calms it down, so faces stay natural.

When to reach for it

  • Portraits and fashion that want slide film's clarity without its bite.
  • Clean editorial and product work.
  • A subtle, fine-grained film look on video.

How it works

Every roll runs through one film model, with its own profile. Exposure and halation happen in linear light, the way light reaches the film. Then the stock's curve rolls off the highlights, sets contrast and color, and the lab, grain and scan finish the print. Slide film has no print stage to rescue it, so an exposure change shows almost one to one and the highlights have little room. Soft Slide 100 has the same narrow latitude as the other slides, but the gentlest contrast and color of the three.

Controls

20 controls in 9 sections, in the order Tune shows them.

Stock

  • Hero knobStrength 0 to 100 · rests at 100

    The hero. How much of the stock's color and tone goes onto your picture. Grain and Fade stay on at any setting.

  • FaderExposure −3.0 EV to +3.0 EV · rests at 0 EV

    Over or under, in stops. Slide film forgives almost nothing. Over burns the highlights out, under sinks into dark, grainy shadows.

Lab

  • FaderPush / pull Pull 1.0 to Push +3.0 · rests at Box speed

    Push develops the roll longer. Contrast climbs, blacks crush and the grain gets bigger and heavier. Pull goes the other way, softer, with lifted blacks and lighter grain.

  • SelectLab StandardCrispSoftPrintFlat

    How the lab scans or prints it. Crisp is punchy, with golden skin and cool shadows. Soft is gentle and peachy. Print has deep blacks and pushes foliage toward yellow and reds toward orange. Flat is low contrast, ready to grade.

Format

  • SelectFormat Half frame35mm120Cine 35

    The film size, which sets the grain. A small negative is enlarged more, so Half frame has the biggest grain and 120 the finest. Cine 35 is a touch coarser than 35mm.

  • KnobGate weave 0 to 100 · rests at 0

    The frame drifts and bobs, like film running through a movie camera's gate. It crops in a hair so the edges never show, and it loops cleanly.

Color

  • FaderWarmth -100 to +100 · rests at 0

    Cooler or warmer, on top of the stock's own color.

  • KnobFade 0 to 100 · rests at 0

    Lifts the blacks to a soft, slightly cool gray and dims the whites a touch, like an old print.

Grain

  • KnobGrain 0 to 100 · rests at 12

    How much grain. It gathers in the midtones and shadows, thins out in the highlights, and changes every frame.

  • KnobGrain size 0 to 100 · rests at 18

    How big each grain is. Format and Push / pull scale it too.

Halation

  • KnobHalation 0 to 100 · rests at 0

    The red glow that blooms around bright highlights, where light bounces back through the film. The hottest lights glow orange.

  • KnobSpread 0 to 100 · rests at 40

    How far the glow reaches.

  • KnobThreshold 0 to 100 · rests at 60

    How bright a highlight has to be before it glows. Low, and most of the picture glows. High, and only the hottest lights do. Exposure moves it too.

Light

  • SelectLight source MatchedTungstenFluorescentSodiumMixed

    The light the scene was shot under, as film sees it. Matched is clean. Tungsten goes orange, Fluorescent goes green, Sodium drains the color to street-lamp orange, and Mixed puts green in the shadows under warm highlights.

Darkroom

  • KnobBleach bypass 0 to 100 · rests at 0

    Skips the bleach, so silver stays in the film. Color drains, contrast climbs and the picture turns hard and silvery.

  • KnobExpired 0 to 100 · rests at 0

    Old stock. The blacks fog up, contrast sinks, the picture drifts toward the Drift color and a fine noise flickers over it.

  • SelectDrift MagentaCyanGreen

    Which way the expired film turns. Magenta, Cyan or Green. It shows only with Expired up.

Scan

  • SelectScanner LabFlatbedDrum

    How the film is scanned. Lab is clean, Flatbed is soft and a little lifted, Drum is crisp and sharpened.

  • KnobScan sharpen 0 to 100 · rests at 0

    Scanner sharpening on top of the scan. A little brings up detail, a lot leaves bright edges and crunchy grain.

  • KnobDust 0 to 100 · rests at 0

    White specks of dust on the scan. Past halfway, a hair lands on the frame too. They hold still through the loop.

Presets

7 presets. Each one opens in the studio as a shared look. Add it on top of your picture, or save it to My looks.